Cudy AP1300 Wall 1.0
Cudy AP1300 Wall 1.0 (AC1200 Wall-Plate Access Point) متوفّر بالجملة عند Cudy Lebanon & Syria بلبنان وسوريا. أكسس بوينت. اطلب السعر والكمية عالواتساب.
A wall-mounted WiFi AP with a built-in 5-GbE switch ideal for covering a room or ensuite in hospitality environments. One PoE output allows for connecting an IP phone or other PSE-enabled devices.
- 4-Stream Dual-Band Wi-Fi
- 867 Mbps + 300 Mbps Wi-Fi
- 1× GbE PoE In, 1× GbE PoE Out, 3× GbE
- 802.3at/af, Passive PoE
- PoE Passthrough
- Watchdog, Schedule Reboot
- Covers 60 m² (650 ft²)
- 40 Connected Devices
- Multi-AP Management
المميزات
Delivers Broader, Faster Wi-Fi for Business
When the 2.4 GHz band is far-reaching in coverage, it is also easily congested by massive legacy devices. The Dual-band feature allows the devices to utilise the less crowded 5 GHz band, enabling speeds more than twice as fast and more responsive.
Seamless Experiences in Multiple Scenarios
When the 2.4 GHz band is far-reaching in coverage, it is also easily congested by massive legacy devices. The Dual-band feature allows the devices to utilise the less crowded 5 GHz band, enabling speeds more than twice as fast and more responsive.
Soft LED, Smart Control — Built for Modern Hotels
When the 2.4 GHz band is far-reaching in coverage, it is also easily congested by massive legacy devices. The Dual-band feature allows the devices to utilise the less crowded 5 GHz band, enabling speeds more than twice as fast and more responsive.
Effortless Wall-Mount Installation
Fits perfectly in a standard electrical box. It simplifies setup by eliminating the need for complex wiring or additional equipment.
Simplified IT Management
When the 2.4 GHz band is far-reaching in coverage, it is also easily congested by massive legacy devices. The Dual-band feature allows the devices to utilise the less crowded 5 GHz band, enabling speeds more than twice as fast and more responsive.
Centralized AP Management
Easily manage up to 200 access points with Cudy AP Controller（Model:C200P）, enabling efficient batch configuration and firmware updates through a unified interface.
المواصفات
| Model Version | |
| AP1300 Wall 1.0 | |
| CPU | |
| CPU Details | 880 MHz Dual-Core CPU |
|---|---|
| Memory/Storage | |
| Flash/ROM | 16 MB (128 Mbit) NOR |
| DDR/RAM | 128 MB (1 Gbit) DDR3 |
| Wireless | |
| 5 GHz Wi-Fi Speed | 867 Mbps |
| 2.4 GHz Wi-Fi Speed | 300 Mbps |
| 5 GHz Wi-Fi Streams | 2 Spatial Streams |
| 2.4 GHz Wi-Fi Streams | 2 Spatial Streams |
| Wi-Fi Antennas | 2× Internal |
| FEM or PA/LNA | 5 GHz: 2× Internal, 2.4 GHz: 2× Internal |
| Beamforming | Yes |
| Range Performance | Max: 80 m (262 ft) Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions. |
| Wall Performance | Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') |
| Interfaces | |
| Gigabit RJ45 Ports | 5 |
| Ethernet Notes | ETH0: PoE In, LAN1: PoE OUT* (*See Power Section) |
| Buttons and LEDs | |
| LED | System |
| Physical Buttons | Reset Button, LED On/Off Button (Configurable to control LED and Wi-Fi) |
| Power | |
| Power Input Type | PoE via Ethernet Port |
| Power Methods | 802.3at/af PoE Passive PoE |
| Power Input | PoE on ETH0: 802.3at/af Passive PoE on ETH0: 48V⎓ |
| Power Output | PoE on LAN1: PoE Passthrough (Similar to Passive PoE the output voltage equals the input voltage range 42.5–57V) |
| Max Power Consumption (W) | 12W (PoE) |
| Idle Power Consumption (W) | 4W |
| Max Power Output (W) | 13.5W |
| Note | The PoE output requires a 802.3at or higher PoE input and must be enabled on the configuration page. |
| Reliability | |
| Advanced | Hardware Watchdog |
| EMC | ESD: Contact: 4kV; Air: 8kV |
| Environment | Operating Temperature: 0 ℃ ~ 40 ℃ (32 ℉ ~104 ℉) Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) Humidity: 10% ~ 90% non-condensing Storage Humidity: 5% ~ 95% non-condensing |
| Certifications | |
| FCC, CE | |
| Mechanical | |
| Installation | Wall-mount |
| Dimension | 143×86×27.6 mm 5.63×3.39×1.09 inches |
| Product Weight | 261.2 g (9.21 oz.) |
| Package Content | |
| AP1300 Wall Installation Guide Mounting Kit | |
| Ordering Information | |
| Retail Package Weight | EU: 362.9 g (12.8 oz.) |
| Retail Package Dimension | 152×39.5×90 mm 5.98×1.56×3.54 inches |
| Units per Carton | 30 |
| Carton Net Weight | EU: 10.9 kg (24.03 lbs) |
| Carton Gross Weight | EU: 11.3 kg (24.91 lbs) |
| Carton Dimension | 32.8×22×29.6 cm 12.91×8.66×11.65 inches |
| Compatibility | |
| Compatible Products | C200P 1.0, C500P 1.0 |
| Compatible Accessories | POE200 2.0, POE300 2.0, POE400 2.0, POE350 2.0, POE200H 1.0, POE400X 2.0, POE350 3.0, POE400 3.0, POE300 3.0, POE52-30W 1.0, POE48-18W 1.0 |