الرئيسية / كل المنتجات / أكسس بوينت
أكسس بوينت
Cudy AP3600 Wall 1.0
BE3600 Wall Plate Wi-Fi 7 Access Point
Cudy AP3600 Wall 1.0 (BE3600 Wall Plate Wi-Fi 7 Access Point) متوفّر بالجملة عند Cudy Lebanon & Syria بلبنان وسوريا. أكسس بوينت. اطلب السعر والكمية عالواتساب.
An in-wall Wi-Fi 7 AP featuring two 2.5GbE Ports and three GbE ports, designed for per-room wireless coverage across a wide range of deployments, including dormitories, apartments, hotels, villas, and offices.
- 2.0 GHz Quad-Core CPU
- Dual-Band Wi-Fi
- 2882 Mbps + 688 Mbps Wi-Fi
- 2× 2.5GbE, 3× GbE
- 802.3at/af PoE
- Multi-AP Management
- Captive Portal, Multi-SSID
- Covers 60 m² (650 ft²)
- 60 Connected Devices
المواصفات
| Model Version | |
| AP3600 Wall 1.0 | |
| CPU | |
| CPU Details | 2.0 GHz Quad-Core |
|---|---|
| Memory/Storage | |
| Flash/ROM | 128 MB (1 Gbit) NAND |
| DDR/RAM | 512 MB (4 Gbit) DDR3 |
| Wireless | |
| MLO Speeds | 3570 Mbps |
| 5 GHz Wi-Fi Speed | 2882 Mbps |
| 2.4 GHz Wi-Fi Speed | 688 Mbps |
| 5 GHz Wi-Fi Streams | 3 Spatial Streams |
| 2.4 GHz Wi-Fi Streams | 2 Spatial Streams |
| Wi-Fi Antennas | 5× Internal |
| FEM or PA/LNA | 5 GHz: 3× Internal, 2.4 GHz: 2× Internal |
| Beamforming | Yes |
| Range Performance | Max: 180 m (591 ft) Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions. |
| Wall Performance | Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
| Interfaces | |
| 2.5G RJ45 Ports | 2 |
| Gigabit RJ45 Ports | 3 |
| Ethernet Notes | ETH0: PoE In, LAN1: PoE OUT* (*See Power Section) |
| Buttons and LEDs | |
| LED | System |
| Physical Buttons | Reset Button, LED On/Off Button (Configurable to control LED and Wi-Fi) |
| Power | |
| Power Input Type | PoE via Ethernet Port |
| Power Methods | 802.3at/af PoE Passive PoE |
| Power Input | PoE on ETH0: 802.3at/af Passive PoE on ETH0: 48V⎓ |
| Power Output | PoE on LAN1: PoE Passthrough (the output voltage equals the input voltage range 42.5–57V) |
| Max Power Consumption (W) | 12W (48V PoE) |
| Idle Power Consumption (W) | 5W (48V PoE) |
| Max Power Output (W) | 13.5W |
| Note | The PoE output requires a 802.3at or higher PoE input and must be enabled on the configuration page. |
| Reliability | |
| Advanced | Hardware Watchdog |
| EMC | ESD: Contact: 4kV; Air: 8kV |
| Environment | Operating Temperature: 0 ℃ ~ 40 ℃ (14 ℉ ~149 ℉) Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5% ~ 90% non-condensing |
| Certifications | |
| FCC, CE | |
| Mechanical | |
| Installation | Wall-mount |
| Dimension | 143×86×27.6 mm 5.63×3.39×1.09 inches |
| Package Content | |
| AP3600 Wall Mounting Kit Installation Guide | |
| Ordering Information | |
| Retail Package Dimension | 152×39.5×90 mm 5.98×1.56×3.54 inches |
| Units per Carton | 30 |
| Carton Dimension | 32.8×22×29.6 cm 12.91×8.66×11.65 inches |
| Compatibility | |
| Compatible Products | C200P 1.0, C500P 1.0 |
| Compatible Accessories | POE200 2.0, POE300 2.0, POE400 2.0, POE350 2.0, POE200H 1.0, POE400X 2.0, POE350 3.0, POE400 3.0, POE300 3.0 |