Cudy IG1005P 2.0
Cudy IG1005P 2.0 (5-Port Gigabit Industrial PoE+ Switch) متوفّر بالجملة عند Cudy Lebanon & Syria بلبنان وسوريا. صناعي. اطلب السعر والكمية عالواتساب.
A 5-GbE industrial PoE switch for networking in harsh conditions such as manufacturing, transportation, maritime, oil & gas, and mining.
- 5× GbE, Shielded, ±6kV Surge Resistant
- 4× 802.3at/af Mode A PoE
- IP40, -40~75°C (-40~167°F)
- Dual DC Inputs, Requires 44~57V Power
- Polarity Reverse Protection
- Short Circuit Protection
- Broadcast Storm Prevention On/Off
- Watchdog On/Off
- Extend On/Off, VLAN On/Off
- Integrated DIN-Rail Bracket
المميزات
Survives Heat, Cold, Surge, and ESD
Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.
Electrical & Physical Robustness
Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.
Essential Features for Reliable Network Operation
Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.
Built for Versatile Situations
Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.
المواصفات
| Model Version | |
| IG1005P 2.0 | |
| Interfaces | |
| Gigabit RJ45 Ports | 5 |
|---|---|
| Gigabit RJ45 PoE Ports | #1~#4 |
| Max Power on a Single PoE Port | 30W |
| PoE Port Notes | The PoE ports comply with IEEE 802.3at/af standards. |
| Shielded RJ45 Port | Yes |
| Extend Mode Ports | #1~#4 |
| VLAN Mode Ports | #1~#4 |
| Buttons and LEDs | |
| LED | Power 1 Power 2 Link/ACT of Each Ethernet Port PoE Status of Each PoE Port |
| Physical Buttons | PoE Watchdog On/Off VLAN On/Off Extend On/Off Broadcast Storm Prevention On/Off |
| Physical Buttons Note | The PoE Watchdog will attempt to reboot the plugged-in clients that have been inactive for 5 minutes. Do not turn it on for clients with online auto-upgrade feature. |
| Performance | |
| Max Copper Speed and Distance | Cat. 3 or higher cable: 100 meters at 10 Mbps Cat. 5 or higher cable: 100 meters at 100 Mbps Cat. 5e or higher cable: 100 meters at Gigabit Cat. 5e or higher cable: 250 meters at 10 Mbps |
| Copper Speed and Distance Note | 250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated. |
| MAC Address Table | 2048 |
| VLANs | 4096 |
| Max Switching Capacity | 10 Gbps |
| Max Forwarding Rate | 7.44 Mpps |
| Jumbo Frame | 2 KB |
| Packet Buffer | 2 Mbit |
| Power | |
| Power Input Type | Power Input Terminal |
| Power Methods | DC via Terminal Block |
| Power Redundancy | Dual Inputs |
| Power Input | 44-57V⎓ |
| Max Power Consumption | 120W |
| Max Power Excluding PoE | 2.0W |
| Idle Power Consumption | 1.4W |
| Polarity Reverse Protection | Yes |
| Short Circuit Protection | Yes |
| Switching | |
| 802.3 Protocols | 802.3at PoE 802.3af PoE 802.3i 10BASE-T 802.3u 100BASE-TX 802.3ab 1000BASE-T 802.3x Flow Control |
| Ethernet | Full Duplex Half Duplex (CSMA/CD) Auto-Negotiation Auto MDI/MDIX |
| Forwarding Method | Store-and-Forward |
| Reliability | |
| MTBF | >200,000 h |
| Grounding Methods | Grounding Point |
| Safety | IEC/EN 62368 |
| EMC | EN55032 Class A EN55035 Class A |
| EMI | FCC 47 CFR Part 15B Class A |
| EMS | IEC/EN 61000-4-2, Level 4 ESD: Contact: 8kV; Air: 15kV IEC/EN 61000-4-3, Level 4 RS: 80 MHz to 1 GHz: 30 V/m IEC/EN 61000-4-4, Level 4 EFT: Power: 2kV; RJ45: 4kV IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 6kV IEC/EN 61000-4-6, Level 3 CS: 10V IEC/EN 61000-4-8, Level 5 PFMF IEC/EN 61000-4-9, Level 5 PMF IEC/EN 61000-4-10, Level 5 DOMF |
| EMS Note | The levels listed in each EMS field are the highest level defined in the IEC/EN standard. |
| Shock | IEC 60068-2-27 |
| Vibration | IEC 60068-2-6 |
| Free Fall | IEC 60068-2-32 |
| Environment | Operating Temperature: -40 ℃ ~ 75 ℃ (-40 ℉ ~167 ℉) Storage Temperature: -40 ℃ ~ 85 ℃ (-40 ℉ ~ 185 ℉) Operating Humidity: 5% ~ 95% non-condensing Storage Humidity: 5% ~ 95% non-condensing |
| Mechanical | |
| Dimension | Device: 33.5×86×118 mm 1.32×3.39×4.65 inches Mounting Space: 33.5×130×138 mm 1.32×5.12×5.43 inches |
| Product Weight | 342.5 g (12.08 oz.) |
| Casing Material | Aluminum |
| Ingress Protection | IP40 |
| Installation | DIN-Rail |
| Package Content | |
| IG1005P Installation Guide | |
| Ordering Information | |
| Retail Package Dimension | 182×137×65 mm 7.17×5.39×2.56 inches |
| Retail Package Weight | 474.0 g (16.72 oz.) |
| Units per Carton | 20 |
| Carton Net Weight | 9.5 kg (20.94 lbs) |
| Carton Gross Weight | 10.1 kg (22.27 lbs) |
| Carton Dimension | 38.8×34.8×29.8 cm 15.28×13.7×11.73 inches |
| Certifications | |
| FCC, CE, RoHS | |