Cudy POE20 1.0
Cudy POE20 1.0 (2-Channel Gigabit PoE++ Extender) متوفّر بالجملة عند Cudy Lebanon & Syria بلبنان وسوريا. إنجكتور و PoE. اطلب السعر والكمية عالواتساب.
A 2-channel PoE extender that splits the PoE into 2 PoE lines and extends their distance by 100m.
- GbE In, 2× GbE Out
- 802.3bt/at/af Input
- 2× 802.3at/af Max 30W Output
- High-Speed/Long-Range Modes
- High-Speed Extension up to 100 meters
- Extend for 250 meters Transmission
- Wall-Mount
المميزات
Connect Further. Deploy Flexibly.
High-Speed/Long-Range/Daisy Chain — Choose High-Speed mode to extend PoE by 100 m, or Long-Range mode to reach up to 250 m by limiting the speed to 10 Mbps. Need more distance and high speed? You can add up to three extenders in a daisy chain to achieve a total extension of 300 m.
Built for Consistent Networking 24/7
High-Speed/Long-Range/Daisy Chain — Choose High-Speed mode to extend PoE by 100 m, or Long-Range mode to reach up to 250 m by limiting the speed to 10 Mbps. Need more distance and high speed? You can add up to three extenders in a daisy chain to achieve a total extension of 300 m.
High-Speed. Plug and Play.
High-Speed/Long-Range/Daisy Chain — Choose High-Speed mode to extend PoE by 100 m, or Long-Range mode to reach up to 250 m by limiting the speed to 10 Mbps. Need more distance and high speed? You can add up to three extenders in a daisy chain to achieve a total extension of 300 m.
المواصفات
| Model Version | |
| POE20 1.0 | |
| Protocols | |
| 802.3 Protocols | 802.3i 10 Mbps over Twisted Pair 802.3u 100 Mbps over Twisted Pair 802.3ab 1 Gbps over Twisted Pair 802.3x Flow Control 802.3af PoE 802.3at PoE 802.3bt PoE |
|---|---|
| PoE | |
| Uplink Stream | 1× GbE, 802.3bt/at/af |
| Uplink PIN Assignment | Mode A / Mode B / Four-Pair |
| Downlink Stream | 2× GbE, 802.3at/af |
| Downlink Pin Assignment | Mode A |
| Transimission Distance | Cat. 5e or higher cable: 100 meters at Gigabit Cat. 5e or higher cable: 250 meters at 10 Mbps Note: Distance from extender to switch depends on switch capability. Distance from extender to device follows extender rating |
| Transimission Distance Note | 250-meter transmission is only available under the Long-Range mode. |
| Buttons and LEDs | |
| Physical Buttons | High-Speed/Long-Range DIP Switch |
| LED | PoE Status of Each PoE Port, Link/ACT of Each Ethernet Port |
| Power | |
| Power Input Type | PoE via Ethernet Port |
| Power Methods | 802.3at/af PoE 802.3bt PoE |
| Power Input | PoE IN: ≥60W is recommended |
| Max Power Consumption (W) | 2W |
| Max Power Output (W) | 2× 30W |
| Note | The actual power output depends on input |
| Reliability | |
| Power Protection | Polarity Protection Overvoltage Protection Short-Circuit Protection Automatic Voltage Regulation |
| EMC | IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV IEC/EN 61000-4-5, Level 3 Surge: RJ45: CM 2kV |
| Environment | Ambient Operating Temperature: 0~40 ℃ (32~104 ℉) Storage Temperature: -40~70 ℃ (-40~158 ℉) Operating Humidity: 10%~95% non-condensing Storage Humidity: 5%~95% non-condensing |
| Certifications | |
| FCC, CE | |
| Mechanical | |
| Install in a Daisy Chain | Up to 3 extenders in a chain |
| Installation | Desktop Wall-mount |
| Dimension | 123×50×36 mm 4.84×1.97×1.42 inches |
| Casing Material | Plastic |
| Product Weight | 89.6 g (3.16 oz.) |
| Package Content | |
| POE20 Mounting Kit Installation Guide | |
| Ordering Information | |
| Retail Package Dimension | 128×56×45 mm 5.04×2.2×1.77 inches |
| Retail Package Weight | 124.0 g (4.37 oz.) |
| Units per Carton | 40 |
| Carton Net Weight | 5.0 kg (11.02 lbs) |
| Carton Gross Weight | 5.4 kg (11.9 lbs) |
| Carton Dimension | 28.1×25.5×24.7 cm 11.06×10.04×9.72 inches |