Cudy POE25 2.0
Cudy POE25 2.0 (2-Channel Outdoor Gigabit PoE++ Extender) متوفّر بالجملة عند Cudy Lebanon & Syria بلبنان وسوريا. إنجكتور و PoE. اطلب السعر والكمية عالواتساب.
A weather-proof 2-channel PoE extender that extends the PoE distance by 100m.
- IP67, -20~70 °C (-4~158 °F)
- GbE In, 2× GbE Out
- 802.3bt/at/af Input
- 2× 802.3at/af Max 30W Output
- High-Speed Extension up to 100 meters
- Wall-Mount
المميزات
Designed for Harsh Outdoor Environment
What is a PoE Extender? A PoE Extender allows you to extend both power and data over Ethernet beyond the standard 100 m (328 ft) limit. It receives PoE input from a PoE switch or injector and outputs power and data to the next device or another extender.Can I connect a PoE Extender directly to a non-PoE switch? No. A non-PoE switch does not provide power through Ethernet. You must use a PoE injector between the switch and the extender to supply power if you do not have a PoE switch.My PoE Extender is not working. What should I check first? Please verify the following:The upstream device (switch or injector) supports PoE or PoE+ (802.3af/at).Non-PoE switches cannot power the extender.The Ethernet cable is Cat5e or higher, in good condition, and under 100 m per segment.The total chain length (from the switch to the final device) does not exceed the maximum supported distance.The powered device (PD), such as a camera or AP, does not exceed the extender’s PoE output capacity.
High-Speed. Plug and Play.
What is a PoE Extender? A PoE Extender allows you to extend both power and data over Ethernet beyond the standard 100 m (328 ft) limit. It receives PoE input from a PoE switch or injector and outputs power and data to the next device or another extender.Can I connect a PoE Extender directly to a non-PoE switch? No. A non-PoE switch does not provide power through Ethernet. You must use a PoE injector between the switch and the extender to supply power if you do not have a PoE switch.My PoE Extender is not working. What should I check first? Please verify the following:The upstream device (switch or injector) supports PoE or PoE+ (802.3af/at).Non-PoE switches cannot power the extender.The Ethernet cable is Cat5e or higher, in good condition, and under 100 m per segment.The total chain length (from the switch to the final device) does not exceed the maximum supported distance.The powered device (PD), such as a camera or AP, does not exceed the extender’s PoE output capacity.
FAQ
What is a PoE Extender? A PoE Extender allows you to extend both power and data over Ethernet beyond the standard 100 m (328 ft) limit. It receives PoE input from a PoE switch or injector and outputs power and data to the next device or another extender.Can I connect a PoE Extender directly to a non-PoE switch? No. A non-PoE switch does not provide power through Ethernet. You must use a PoE injector between the switch and the extender to supply power if you do not have a PoE switch.My PoE Extender is not working. What should I check first? Please verify the following:The upstream device (switch or injector) supports PoE or PoE+ (802.3af/at).Non-PoE switches cannot power the extender.The Ethernet cable is Cat5e or higher, in good condition, and under 100 m per segment.The total chain length (from the switch to the final device) does not exceed the maximum supported distance.The powered device (PD), such as a camera or AP, does not exceed the extender’s PoE output capacity.
المواصفات
| Model Version | |
| POE25 2.0 | |
| Protocols | |
| 802.3 Protocols | 802.3i 10 Mbps over Twisted Pair 802.3u 100 Mbps over Twisted Pair 802.3ab 1 Gbps over Twisted Pair 802.3x Flow Control 802.3af PoE 802.3at PoE 802.3bt PoE |
|---|---|
| PoE | |
| Uplink Stream | 1× GbE, 802.3bt/at/af |
| Uplink PIN Assignment | Mode A / Mode B / Four-Pair |
| Downlink Stream | 2× GbE, 802.3at/af |
| Downlink Pin Assignment | Mode A |
| Transimission Distance | Cat. 5e or higher cable: 100 meters at Gigabit Note: Distance from extender to switch depends on switch capability. Distance from extender to device follows extender rating |
| Power | |
| Power Input Type | PoE via Ethernet Port |
| Power Methods | 802.3at/af PoE 802.3bt PoE |
| Power Input | PoE IN: ≥60W is recommended |
| Max Power Consumption (W) | 2W |
| Max Power Output (W) | 2× 30W |
| Note | The actual power output depends on input |
| Reliability | |
| Power Protection | Polarity Protection Overvoltage Protection Short-Circuit Protection Automatic Voltage Regulation |
| EMC | IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV IEC/EN 61000-4-5, Level X Surge: RJ45: CM 6kV |
| Grounding Methods | Grounding Point |
| Environment | Ambient Operating Temperature: -20~70 ℃ (-4~158 ℉) Storage Temperature: -40~70 ℃ (-40~158 ℉) Operating Humidity: 10%~100% non-condensing Storage Humidity: 5%~95% non-condensing |
| Ingress Protection Rating | IP67 |
| Certifications | |
| FCC, CE | |
| Mechanical | |
| Install in a Daisy Chain | Up to 3 extenders in a chain |
| Installation | Desktop Wall-mount |
| Dimension | 241×95×41.3 mm 9.49×3.74×1.63 inches |
| Casing Material | Metal |
| Product Weight | 324.0 g (11.43 oz.) |
| Package Content | |
| POE25 Mounting Kit Installation Guide | |
| Ordering Information | |
| Retail Package Dimension | 210×127×52 mm 8.27×5×2.05 inches |
| Retail Package Weight | 521.5 g (18.4 oz.) |
| Units per Carton | 20 |
| Carton Net Weight | 10.4 kg (22.93 lbs) |
| Carton Gross Weight | 11.0 kg (24.25 lbs) |
| Carton Dimension | 44.3×28.4×27.9 cm 17.44×11.18×10.98 inches |